Transfering Parts from Syrup MK1 to Syrup MK2
#===================================================================================================================================#
SSH into Syrup MK1 and Shut down the server
Unplug Syrup MK1 and place at work bench
Struggle to attach the sfx to atx bracket for the PSU, eventually just let it rest on the floor (it’s fine)
Plug the motherboard into the PSU
Plug in the CPU to the PSU
Remove the RAM from Syrup MK1 and Plug into every other slot on Syrup MK2 in appropriate spots
Remove the Boot Drive NVME from Syrup MK1
Remove the NVME Cover on NVME Slot #1 on Syrup MK2
Install Syrup MK1’s NVME Drive into this slot
Put the NVME Cover back on
Remove the cover for the Rear PCIE Bracket’s and the left 3 slots
Install the GPU into the PCIe Slot
Plug in the GPU to the PSU
Plug the Bottom Rear Case fans into the Motherboard
Install the SSD’s into the case
Unscrew the Back Plate of the Synology DS423 and remove the HDD’s
Remove the Hotswappable Cover off Syrup MK2
Attach the Front Pull Out Straps to the HDD’s
Attach the HDD sliders to the sides of each HDD
Install the HDD’s to Syrup MK2
