Bazzite Box Assembly

Assemble your PC Parts

#===================================================================================================================================#

• Set your Case on your work area, unscrew and begin to disassemble the Case Parts from the Frame

• Install the RAM into their Respective Slots

• Take the NVME SSD Screw Out of it’s Holding Place, insert your NVME SSD into it’s slot, reinstall hold down screw on top of the NVME SSD

• Next, move to the CPU Slot, push the socket lever down and out

• Line the arrow on the corner of your AMD CPU up with the arrow on the corner of the CPU slot on the motherboard, and gentle push down

• Line up and screw in the CPU Cooler, connecting it’s fan to the Pins in the corner near the CPU PSU Connector

• Next, we will be installing the motherboard onto the actual Chassis, so unscrew the PCI-E Riser card Bracket and move to the side, install the I/O Motherboard Shiel

• Next, install the Motherboard into the PC Chassis

• Next the SATA Ports, you will find the Front Panel I/O USB Connector, plug that in

• Next to the RAM slot, you will find 1 of the 2 Case Fan Pins - plug them in here

• Near the I/O Shield, you will find the HD Audio Pins, plug them in

• Next, Screw the PSU into the Case

• Plug in the CPU, Motherboard & Plug in a PCI-E Cable for the GPU

• Install the GPU on the Riser Card, if you have a PCI-E Slot Extender, use that if your card is Shorter! Then Plug the GPU into Power from the PSU

• Assemble the Base Stand and attach to Case

• Reassemble the case and install an OS!